Minimum Film Forming Temperature ( MFFT ) is the lowest temperature at which a latex, emulsion or adhesive will uniformly coalesce when laid on a substrate as a thin film. An accurate MFFT value allows the formulation of products that cure correctly under specified application conditions.
Simply place the instrument on range one, allow the platen to stabilise and take note of the temperatures between point 1 and 10. Point 1 should read -5ยฐC and point 10 should read 13ยฐC There should be an even gradient between all points.
The instrument operation is governed by precision temperature sensors which are mounted on the reverse of the measurement platen. The output of these sensors is referenced to precision resistors which are extremely stable with time and different ambient conditions
It is because of this the instrument is completely self calibrating and regulating.
Bespoke cutter die - 1 or 2 of the same shape
Bespoke cutter die - More than 5 different size shapes or additional punched holes within shapes.
